Details	Mileage	Date	Description
	18,000	8/23/2003	Motorcycle purchased
	21,800	3/12/2006	Maintenance log started
Photos	21,800	3/12/2006	New front tire
Photos	21,800	3/12/2006	4 new carb boots
	22,000	3/20/2006	Replaced oil and oil filter (10w40 synthetic blend)
	23,000	6/12/2006	Patched hole in rear tire
Photos	23,900	8/23/2006	New gel battery
Photos	24,400	6/1/2007	Annual maintenance - new valve shims, changed engine oil. trans fluid, final drive fluid, lubed control cables, rebuilt front calipers and front master cylinder, drained / filled / bled front brake system, replaced front wheel bearings, adjusted brake lever / pedal / clutch lever free play, lubed rear brake pedal, lubed centerstand pivots, tightened exhaust bolts, tightened cylinder head bolts, new spark plugs, new head gasket and cam chain tensioner gasket (seals weeped due to sythetic oil front last change), new oil filter, cleaned / regreased spedometer pickup at wheel added engine guards and highway pegs
	26,000	4/18/2008	replaced oil with conventional 10w40 (synthetic was seaping out gaskets)
Photos	26,800	8/15/2008	Added power outlet (cigarette lighter)
Photos	27,100	8/30/2008	Replaced cam chain, replaced oil drain plug washer, replaced rear rotor with EBC Pro-Lite MD2024 rotor, replaced rear brake pads with EBC Organic Pads FA34, replaced cam chain tensioner cover gasket
Photos	27,100	9/10/2008	Replaced factor oil filter assembly with custom Spin-on Oil Filter Cooler Adapter (SOFCA).
Photos	27,200	9/27/2008	Replaced all four exhaust gaskets, replaced missing cam chain tensioner oil plug, replaced missing rear fender nut and bolt
Photos	27,300	10/11/2008	Removed exhaust and had shop weld 2 cracks. Bike now runs smoothly again.
Photos	27,600	3/8/2009	Annual maintenance. Replaced spark plugs with 4 new NGK BP6ES spark plugs. New oil filter (Fram PH3950) and oil (Mobil 5000 10w40). Tightened cylinder head bolts. Adjusted cam chain tension. Inflated tires. Adjusted valve shims for correct valve clearance. E1=280, E2=?, E3=?, E4=?, I1=270, I2=?, I3=?, I4=? Cleaned and re-oiled K&N air filter.
Photos	27,600	4/17/2009	Cleaned carbs with ultrasonic cleaner, replaced float bowl gasket, verified proper float level, tried to balance carbs but failed due to #4 cylinder with no vacuum.
Photos	28,100	6/6/2009	Installed oil cooler and fork brace.
Photos	29,000	7/4/2009	Patched hole in rear tire. Removed and cleaned both petcocks using ultrasonic cleaner and carb cleaning solution. Shortened fuel lines.
Photos	29,100	7/11/2009	Replaced front brake master cylinder (entire reservoir). Replaced front brake lines with stainless steel lines. Added DOT4 brake fluid and bled the lines.
Photos	29,900	3/28/2010	Changed engine oil (10x-40) and oil filter. I love the SOFCA.
Photos	30,000	4/11/2010	New rear tire, Dunlop D404 130/90-16 M/C 67H
Photos	30,300	5/3/2010	Replaced side view mirrors Replaced missing starter button
Photos	30,300	5/19/2010	Polished alternator cover to a mirror finish (well, pretty darn close to a mirror)
Photos	30,300	5/19/2010	Installed Mac 4 into 2 exhaust system to replace my rusted out exhaust
Photos	30,300	5/23/2010	Replaced my ripped OEM seat cover with an aftermarket Saddlemen seat cover (saddleskins)
Photos	30,700	7/17/2010	Replaced cracked stainless steel brake line
Photos	30,800	4/1/2011	Installed new ignition coils and spark plug wires Fixed split pickup coil wires Changed engine oil and oil filter (Mobil 10w-40)
Photos	30,900	4/23/2011	Changed middle and final drive gear oil (Hypoid SAE 85W90 GL-4)
Photos	31,200	5/21/2011	Had shop install new front tire (Dunlop D404F 100/90-19 57H) Also had shop fix a leaky final drive drain plug Lastly, had the shop investigate squirrely front end. They loosened stearing bearing nuts. Too early to say if it helped.
Photos	31,600	6/11/2011	Adjusted idle air mixture Checked carb float level Readjusted carb sychronization Replaced cracked vacuum advance line
Photos		7/14/2011	Installed historic plates
Photos	33,000	8/28/2011	Rejetted carbs to match aftermarket exhaust and K and N air filter
Photos	33,100	11/20/2011	Replaced stripped carb air idle mixture screws. Replaced butterfly shaft seals. Replaced all carb screws with stainless steel hex bolts.
Photos	33,100	1/1/2012	Replaced leaking fuel stop valve in one of the carbs.
Photos	33,100	3/25/2012	Annual maintenance. Most maintenance was done recently enough that I did not redo it. Here is what I did this time around. Changed engine oil (10w40) and oil filter (Fram 3950) Checked brake pads Lubricated brake pedal, side stand, center stand, and drive shaft joint Inspected front steering assembly, battery, fuel lines, engine mounts (getting pretty worn), and throttle Adjusted idle speed